Go Back   DIY Go Kart Forum > Announcements & Suggestions > FAQ & Articles

Notices

Closed Thread
 
Thread Tools Display Modes
  #1  
Old 04-30-2017, 11:30 PM
KartFab's Avatar
KartFab KartFab is offline
Senior Member
 
Join Date: Jan 2013
Location: Dallas, TX
Posts: 3,274
Thanks: 496
Thanked 1,443 Times in 1,020 Posts
Default How to Change a Go Kart Tire

This article will go over how to change a go kart tire, but it can apply to atv and golf-cart tires as well.
  • Get specialized tools (or not)
  • Figure out what size tires you need
  • Break the tire bead
  • Remove the tire from the rim
  • Replace snap in valve stems
  • Mount new tires
  • Seat the bead
  • Inflate the tire

Hopefully this article will help people out (or end up blowing up their tire with starter fluid ). Cheers.
https://kartfab.com/go-kart-maintena...tep-step-guide
Attached Thumbnails
change a go kart tire.jpg   IMG_4256.jpg  

IMG_4234.jpg   how to remove a go kart tire.jpg  

IMG_4257.jpg   how to install a new go kart tire.jpg  

IMG_4278.jpg   inflating a tire with a chuck.jpg  

__________________
Free Go Kart Plans https://kartfab.com Go Kart Videos https://www.youtube.com/c/KartFab
The Following 3 Users Say Thank You to KartFab For This Useful Post:
kc8oye (06-30-2017), landuse (05-02-2017), Randy H (05-02-2017)
  #2  
Old 05-01-2017, 09:06 PM
Hellion's Avatar
Hellion Hellion is offline
Disc brakes'r for cowards
 
Join Date: May 2016
Location: Location: Location:
Posts: 4,626
Thanks: 1,625
Thanked 1,337 Times in 1,090 Posts
Default

Great tutorial as usual. I've however used your (and other's) fire technique for seating bead to rim, with no ill effects. Such barbarism!

These types of tires (tubeless) have several cons as they sometimes leak around the rim and you can have the same issue getting the bead set again if the tire should completely deflate and fall off the rim.

Of course there's option B which is to use split rims and an inner tube...but I think for larger go kart or powersports vehicles, tube-type tires or split rims are quite limited. I'm not entirely sure on that but it's kind of an obsolete technology.
__________________
"I'm just here for the gasoline"
The Following User Says Thank You to Hellion For This Useful Post:
KartFab (05-02-2017)
  #3  
Old 05-01-2017, 09:13 PM
chancer's Avatar
chancer chancer is offline
ɔ ɥ ɐ u ɔ ǝ ɹ
 
Join Date: Oct 2013
Location: COMFORT, TEXAS
Posts: 9,363
Thanks: 2,438
Thanked 3,076 Times in 2,398 Posts
Default

Here is a trick I use.
After removing the valve core, instead of using the blower attachment you used,
I will use an air hose male quick disconnect with nothing threaded to the end, so it is wide open.
This will allow you dump a 5HIT ton of air into the tire quickly, and set the bead.
then just quickly install the valve core.
It also helps to have a helper kink and unkink the air hose for you as needed.
__________________
Why don't you, go back to your double wide and fry something!
The Following 2 Users Say Thank You to chancer For This Useful Post:
KartFab (05-02-2017), Randy H (05-02-2017)
  #4  
Old 05-02-2017, 05:34 AM
Randy H Randy H is offline
Senior Member
 
Join Date: Oct 2016
Posts: 830
Thanks: 778
Thanked 437 Times in 339 Posts
Default

Very nice presentation. Here's another option for bead seating.

https://www.amazon.com/gp/aw/d/B00TL...6-9082ebacae63

An enterprising DIYer could rig up a sprinkler valve and some PVC pipe too.
The Following User Says Thank You to Randy H For This Useful Post:
KartFab (05-02-2017)
Closed Thread

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -6. The time now is 05:24 AM.