For Sale 6" & 5" wheels, hubs, & tires w/ girdles packages
Hey there y'all.
If feeler posts are not allowed, please delete.
Gauging interest in pairs of 4.10/3.50-6" slicks, sets of wheels, hubs (1"), tires, and wheel "girdles."
Brand new and unused!!!
Trying to do these in pairs.
Each package will consist of:
(2) - 4.10/3.50-6 Cheng Shin slicks
(4) - wheel halves
(2) - 1" hubs made for the wheel halves
(4) - wheel girdles. These were designed to prevent hub cracking/breakage we were experiencing with these hubs. We have had great success with these!!!
Not sure if tubes, bearings, and keystock will be included or not.
We think we have enough for 8 pairs, or 4 sets of 4.
We will also have individual components for sale as well.
Shipping is up to you, USPS, FEDEX, UPS, local pick-up in Lancaster County, PA, etc.
I should have photos and prices worked out tomorrow.
I now have these. Everything is brand new and unused. I loosely assembled a rig for photographic purposes. See link below.
Here is a full rig, fronts and rears.
2 - 6" Kenda 4.10/3.50-6 slick tires
2 - 5" Kenda 4.10/3.50-5 slick tires
2 - 6" Kenda angled stem tubes
2 - 5" Kenda angled stem tubes
2 - 1" keyed hubs
2 - 1 3/8- 5/8" ID bearing hubs
2 - 6" wheel halves w/ valve stem hole
2 - 5" wheel halves w/ valve stem hole
2 - 6" wheel halves
2 - 5" wheel halves
4 - strengthening 'girdles' for 6" rear wheel assembly (2 inner/2 outer)
36 - lock washers
36 - nuts
20 - bolts
1/4" key stock for rears
asking $130 + shipping costs of method of your choice.
Shipping weight will be around 35 LBS for the full set of 2 fronts, 2 rears, and 4 wheel girdles for the rears.
Will do fronts or rears separately with hardware.
Girdles also available separately. They should work on any 6" rim, provided it has a half inch lip AND your hub is flush with the rims lip.
$70 for 6" REAR set w/ girdles = 20 LBS
$60 for 5" FRONT set = 13 LBS
$30 for 4 single girdles for 6" wheels = 3 LBS
High speed bearings for FRONTS $5 /each = shipping for 4 should be about $2.50.
Figure your own shipping using the weights provided above, and I will take it wherever you want; FedEX, UPS, USPS, etc. I'm in zip code 17602.
Can also do 5" for live axle or 6" for bearings or vice-versa, or whatever.
We have 4 pairs front, 5 pairs rear.
We're trying to do sets of 4 or at least pairs (front or rear) before we start piecing them out.
I also have a NOS Briggs 5hp never run, never had oil in it, military issue, dual bearing motor. No carb/tank, rope start, model number 131436. Make offer.
PM'S are best!!