Go Back   DIY Go Kart Forum > Building Plans And Advice > Photo Gallery & Project Log

Notices

Reply
 
Thread Tools Display Modes
  #61  
Old 04-17-2018, 12:46 PM
Kentucky Boy's Avatar
Kentucky Boy Kentucky Boy is offline
Senior Member
 
Join Date: Dec 2015
Location: Bowling Green, KY
Posts: 796
Thanks: 135
Thanked 345 Times in 244 Posts
Default

Quote:
Originally Posted by Allracing View Post
Thank you 😊 I wish I had it all covered! It is my first build though and I really don’t. No idea if/how this thing is going to drive and handle when it is finished but only one way to find out I guess 😊
Well by the looks of it so far the thing should last! Nice fab work👍🏻👍🏻
Reply With Quote
The Following User Says Thank You to Kentucky Boy For This Useful Post:
Allracing (04-18-2018)
  #62  
Old 04-23-2018, 08:50 AM
Allracing Allracing is online now
Member
 
Join Date: Feb 2012
Posts: 38
Thanks: 25
Thanked 34 Times in 20 Posts
Default Wheelbarrow hot rod

I put in some more work on the axle side of the split wishbones. First, machined the end pieces to approximately the height of the ‘bones end:







Then ground them with a die grinder with a carbide tool to fit inside the ‘bones:





Then test fitted the assembly to the frame:



Fiddled with this setup to achieve around 6deg caster angle on the king pin by adjusting the angle of the end pieces relative to the wishbone themselves. Then spot welded the axle end pieces to the ‘bones
Reply With Quote
The Following 4 Users Say Thank You to Allracing For This Useful Post:
ezcome-ezgo (04-23-2018), landuse (04-24-2018), Nosandwich (04-23-2018), shadowfocus603 (06-08-2018)
  #63  
Old 06-07-2018, 09:34 PM
jonboy jonboy is offline
Senior Member
 
Join Date: Jun 2012
Location: Owensboro, KY
Posts: 118
Thanks: 7
Thanked 24 Times in 23 Posts
Default

Any more on this build. I am enjoying the progress so far
Reply With Quote
  #64  
Old 07-01-2018, 01:34 AM
Bumpy Bumpy is offline
Junior Member
 
Join Date: Jul 2018
Location: Knoxville TN
Posts: 3
Thanks: 0
Thanked 1 Time in 1 Post
Default

Cool idea!
Reply With Quote
  #65  
Old 07-03-2018, 04:29 PM
Allracing Allracing is online now
Member
 
Join Date: Feb 2012
Posts: 38
Thanks: 25
Thanked 34 Times in 20 Posts
Default

Life’s been busy with, unfortunately, little time for building hot rods. I have been able to stick in 1/2hr here and there, but no significant progress. I expect the situation to improve after summer as my family has hired an au pair who will arrive in august! Looking forward to getting some relief when it comes to day to day chores.

I have had some progress on the front end which is done minus steering. I used one leaf out of helper spring from my -59 Chevy truck. This is not an optimal solution, but it will have to do for now. Down the road I will probably get a golf cart spring as was suggested earlier in this thread. I haven’t really taken alot of pics of this minor progress, but heres’s how she sits right now:



These pics are pretty much self explanatory as to what is done.....it is getting more interesting from here as steering is up next. Will be back with more in august or early september



Sent from my iPad using Tapatalk
Reply With Quote
The Following 2 Users Say Thank You to Allracing For This Useful Post:
ezcome-ezgo (07-05-2018), landuse (07-04-2018)
  #66  
Old 07-04-2018, 12:16 AM
landuse's Avatar
landuse landuse is offline
Moderator
 
Join Date: Nov 2010
Location: Pietermaritzburg, South Africa
Posts: 16,111
Thanks: 1,525
Thanked 2,997 Times in 2,436 Posts
Default

Looking good!
Reply With Quote
The Following User Says Thank You to landuse For This Useful Post:
Allracing (09-16-2018)
  #67  
Old 07-09-2018, 05:58 AM
TriggerMan TriggerMan is offline
Junior Member
 
Join Date: Jan 2018
Posts: 1
Thanks: 0
Thanked 1 Time in 1 Post
Default

The build is looking really good so far. I'm eagerly awaiting your updates and pictures of your progress. I've started stockpiling parts and steel for one myself. I'm not ashamed to admit this is my motivation.
Reply With Quote
The Following User Says Thank You to TriggerMan For This Useful Post:
Allracing (09-16-2018)
  #68  
Old 07-24-2018, 10:32 PM
Shady Sherlock Shady Sherlock is offline
Junior Member
 
Join Date: Jul 2018
Location: East Coast, N. Carolina, USA
Posts: 2
Thanks: 0
Thanked 2 Times in 1 Post
Default

Hi.
First a quick introduction. My name's Alan, I'm from East coast region of N. Carolina. My main backround has been automotive technician and upholstery fabricator for the past 35yrs.
Recently sold out my business of 20years and am now on temporary, indefinite personal hiatus and have been looking for a creative outlet/ something else to build.

After reading through this thread, I had to register to the forum.
Allracing, you're build is inspiring for me. The machine work and creativity especially!

I have my own Bridgeport mill, a small lathe, tube bender, notcher, welder, etc.
I built a few crazy stretch cruiser pedal bikes last year, just for the hellofit.
After seeing your build thread, I think I have found my next project!

Hopefully in the near future, I will have something to contribute to the group.
Thanks for the inspiration and I hope to be posting among you folks very soon!
Reply With Quote
The Following 2 Users Say Thank You to Shady Sherlock For This Useful Post:
Allracing (09-16-2018), qtband (07-25-2018)
  #69  
Old 07-24-2018, 11:49 PM
landuse's Avatar
landuse landuse is offline
Moderator
 
Join Date: Nov 2010
Location: Pietermaritzburg, South Africa
Posts: 16,111
Thanks: 1,525
Thanked 2,997 Times in 2,436 Posts
Default

Quote:
Originally Posted by Shady Sherlock View Post
Hi.
First a quick introduction. My name's Alan, I'm from East coast region of N. Carolina. My main backround has been automotive technician and upholstery fabricator for the past 35yrs.
Recently sold out my business of 20years and am now on temporary, indefinite personal hiatus and have been looking for a creative outlet/ something else to build.

After reading through this thread, I had to register to the forum.
Allracing, you're build is inspiring for me. The machine work and creativity especially!

I have my own Bridgeport mill, a small lathe, tube bender, notcher, welder, etc.
I built a few crazy stretch cruiser pedal bikes last year, just for the hellofit.
After seeing your build thread, I think I have found my next project!

Hopefully in the near future, I will have something to contribute to the group.
Thanks for the inspiration and I hope to be posting among you folks very soon!
Welcome. Maybe start a thread in the introduction section so that you can introduce yourself properly
Reply With Quote
  #70  
Old 08-17-2018, 09:55 AM
Gumptattoo Gumptattoo is offline
Junior Member
 
Join Date: Aug 2018
Posts: 2
Thanks: 1
Thanked 1 Time in 1 Post
Default

This build looks like it is on the right track. Nice work. I am curious why you did the leaf spring below instead of above the frame?
Reply With Quote
The Following User Says Thank You to Gumptattoo For This Useful Post:
Allracing (09-16-2018)
  #71  
Old 08-18-2018, 03:06 PM
Allracing Allracing is online now
Member
 
Join Date: Feb 2012
Posts: 38
Thanks: 25
Thanked 34 Times in 20 Posts
Default

Quote:
Originally Posted by Gumptattoo View Post
This build looks like it is on the right track. Nice work. I am curious why you did the leaf spring below instead of above the frame?


Good question. I have the option to flip the frame over and have the spring on top. The spring I am using now is so flat I need to have it underneath as I have to put spacers between it and frame to get a reasonable ground clearance. It just so happens however that I have purchased a spring from a golf cart, it is being shipped as we speak. It can go back or front, still to be decided. If front, maybe I will flip the frame


Sent from my iPad using Tapatalk
Reply With Quote
  #72  
Old 08-25-2018, 03:16 PM
Allracing Allracing is online now
Member
 
Join Date: Feb 2012
Posts: 38
Thanks: 25
Thanked 34 Times in 20 Posts
Default Wheelbarrow hot rod

Finally found some time to progress my build 😊 Steering is up next and I’ve been going back and forth on how to tackle it. I did buy a steering box from a beetle a while back and while overkill for the build, that is what I plan on using:



The steering will be ‘’traditional’’ with a drag link running along the length of the frame. I will emulate what is called ‘’cowl’’ steering which means that the steering box sits high and close to the steering wheel with the pitman arm pointing downwards. Something like this:



Cut out the wheelbarrow box:



Then started fabbing a loop under which the steering box will hang. I wanted to emulate the shape of a typical early Ford cowl. Used 30x3mm (1 3/16 x 1/8’’) square tubing here:





Tacked on a bracket for the ‘box:



Started welding up all the cuts:



It is going to take a lot of welding and grinding to get the bends finished off. Don’t know that I would recommend this way of bending to anyone 😉

This is as far as I got today, more to come 😊
Reply With Quote
The Following User Says Thank You to Allracing For This Useful Post:
ezcome-ezgo (08-27-2018)
  #73  
Old 09-03-2018, 09:26 AM
Allracing Allracing is online now
Member
 
Join Date: Feb 2012
Posts: 38
Thanks: 25
Thanked 34 Times in 20 Posts
Default Wheelbarrow hot rod

Continued on the steering. This has been a thinking game most of all as there was no clear design in place prior to starting 😉

First of all i finished welding up and grinding my “loop-cowl”:



I took apart the VW ‘box to do some machining on the output shaft:



And machined it. I short I needed to extend the output shaft and decided to make it accept what is known as a DD steering shaft. A custom DD shaft made by me, that is 😉





Then made the DD shaft:



It fits! Drilled and tapped for a set screw too:





Mocked up:



The other end of the shaft needed to accept a pitman arm. Decided to make the pitman from steel plate which somewhat dictated the solution. Made adapter for the arm with a press fit and pressed it on:











Sent from my iPad using Tapatalk
Reply With Quote
The Following User Says Thank You to Allracing For This Useful Post:
ezcome-ezgo (09-04-2018)
  #74  
Old 09-04-2018, 07:21 AM
ezcome-ezgo's Avatar
ezcome-ezgo ezcome-ezgo is offline
G'me sumthin to write on
 
Join Date: Aug 2015
Location: Atlanta, GA
Posts: 2,751
Thanks: 2,330
Thanked 894 Times in 715 Posts
Default

This is fun.
__________________
My name is Sylvester McMonkey McBean.
Reply With Quote
The Following User Says Thank You to ezcome-ezgo For This Useful Post:
Allracing (09-05-2018)
  #75  
Old 09-05-2018, 02:49 AM
zeno zeno is offline
Junior Member
 
Join Date: Nov 2017
Posts: 1
Thanks: 0
Thanked 1 Time in 1 Post
Default

Awesome work. Can't wait to see the end.
Reply With Quote
The Following User Says Thank You to zeno For This Useful Post:
Allracing (09-05-2018)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -6. The time now is 05:22 AM.