Go Back   DIY Go Kart Forum > Building Plans And Advice > Engines & Clutches

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 03-13-2020, 03:19 PM
TheBeaves26 TheBeaves26 is offline
Junior Member
 
Join Date: Feb 2019
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
Default Throttle hookup

I have a briggs and I have no idea how to hook up the throttle. Any help is appreciated
Attached Thumbnails
20200310_151601.jpg  
Reply With Quote
  #2  
Old 03-13-2020, 07:25 PM
J.S.@SMS's Avatar
J.S.@SMS J.S.@SMS is offline
Road Hazard
 
Join Date: Sep 2018
Location: Weeki Wachee Fl.
Posts: 867
Thanks: 72
Thanked 150 Times in 134 Posts
Default

What you have to do is get one of the throttle cable housing clamps from something like a predator (the thing that looks a bit like a C, and has a screw going through it). Install it in the threaded hole with the notch above it (not the one the spring's hooked to, the other one). Use that clamp to hold the cable housing, and thread the throttle cable through the hole on the throttle arm. Then use a barrel clamp (also found on predator, honda, etc. throttles) to hold the throttle to the arm (feed the throttle cable through the hole from the top, and put the barrel clamp in the bottom of the arm).

Also, it looks like the spring fell off the throttle arm. You want the setup to look something kile this. And use a pair of needle nose pliers to take off the kill switch, remove the wire and put a bullet connector on it, and run your kill switch to that.

Click image for larger version

Name:	IMG_0214.jpg
Views:	8
Size:	475.0 KB
ID:	116743
__________________
For his personal safety, keep this one away from bicycles.
Reply With Quote
  #3  
Old 03-13-2020, 10:39 PM
TheBeaves26 TheBeaves26 is offline
Junior Member
 
Join Date: Feb 2019
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
Default

How do you mean?
And yes I know that's off. I was taking the plate on and off
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -6. The time now is 04:31 PM.