#1
|
|||
|
|||
![]()
Hello... So one of yerf dog bodies I bought came with the torque converter too. Pretty sweet for only $50. Problem I have is the piece that goes in the engine shaft is in pieces and I can't seem to figure it out. Anyone have a manual fr this? It's a comet torque converter. Thanks all!
|
#2
|
|||
|
|||
![]()
comet 30-series driver...part #9 isn't applicable after 1995...otherwise this outta do it. the small bushing/spacer in your pic goes on the shaft before you put the pulley on.
|
#3
|
|||
|
|||
![]()
Awesome! Thank you so much for this! I'm going to try putting it together tomorrow. Do you know what the max HP rating for these are? Is it 9hp?
|
#4
|
||||
|
||||
![]()
The reating is 8HP. If you look at the top left of the literature for this TC you will see the 8HP rating. You should be able to get away with your 9HP though. The TC's are somewhat overengineered
|
![]() |
Thread Tools | |
Display Modes | |
|
|