Hawg-TY 10hp diesel mini bike & pics

[porsche930dude]

cool! make sure you line up the sprockets without the chain on it because it can be very deceiving. crouching at the back of the bike looking forward across the sprocket twords the clutch. I also agree your gearing is way too high. try 5:1 and see how it goes. you need to run it in the range its designed for. you certainly shouldnt be going over 40 on that thing anyway. but the way youve got it geared itll probrobly do 60

[porsche930dude]

heres a street legal one. as you can see he has a torque converter

[numscul]

here are a few more pics

[landuse]

Thats killer! You did a good job on your bike. I am glad this project got finished

[Famvirs]

Common use - Dapoxetine belongs to a class of selective serotonin reuptake inhibitors (SSRIs). This short-acting inhibitor is used to treat premature ejaculation in men.
I am ready to accept the situation that customer support sometimes can be dull when I want to trace my order plus order priligy
I take priligy pill and it works as expected but after sexual intercourse I sometimes feel muscle pain in the back and fatigue. I do not know if this is because I work like a stud or it is a side effect. Anyway I am lucky that I gave it a try.

[numscul]

So far iv got the mini bike up to about 56mph or 90.12kph it still wants to go faster but im
not so sure i want to go any faster ...It seems like when i hit about 35mph i get a little boost almost like the clutch is fully engaging ........

[numscul]

Ok ....after i posted the pics earlier today i took the mini bike out for a ride and as i got up to about 50mph the chain popped off ...........So i took the whole thing apart "every nut and ever bolt and i found that the engine has been mounted slightly off only about 1/8th of an inch .....Is their anyone who has had this problem before ....And what did you do to fix it .....im thinking about making the mounting holes elongated so i can slide the engine into the correct place ....But what holes do i need to elongate to do this.....

[Jcotz]

For me, I had chronic problems with my chain falling off. My solution was to take all possible slack out of the chain. This worked, but I think may be bad for the clutch.

[Badot]

If the chain is misaligned adding more tension can easily do major damage.

Which way is it off -- can you just slide the clutch out a little farther on the shaft?

[landuse]

Originally Posted by Jcotz

For me, I had chronic problems with my chain falling off. My solution was to take all possible slack out of the chain. This worked, but I think may be bad for the clutch.

You need some slack in your chain. If not you start ruining sprockets and clutches

[mckutzy]

I would elongate the holes to allow movement and to make adjustments. Use a straight edge to check alignment.

[numscul]

OK ITS IN PIECES ......Got the engine off NOW ITS Time to bust out the Air Die Grinder and make hole ! Thanx guy's
Ill take a few pics and post them

[numscul]

HA HA ....Well i got it put back together just in time for my mom to come home and tell me
she F@>K&N hates it the foot pegs are to far out ....The handle bars don't come out far enough ......The seat hurts her *** ......and she HATES IT ........HA HA .... AND THATS THE THANKS I GET

[souperman000]

Who cares?? I think it turned out good at least...

[landuse]

Originally Posted by numscul

HA HA ....Well i got it put back together just in time for my mom to come home and tell me
she F@>K&N hates it the foot pegs are to far out ....The handle bars don't come out far enough ......The seat hurts her *** ......and she HATES IT ........HA HA .... AND THATS THE THANKS I GET

Great!! Now you get to keep it yourself..

[numscul]

O Yeah .....The mini Bike is done ...no more problems