Go Back   DIY Go Kart Forum > Building Plans And Advice > Photo Gallery & Project Log

Notices

Closed Thread
 
Thread Tools Display Modes
  #41  
Old 03-08-2019, 06:41 PM
Mavaholic Mavaholic is offline
Member
 
Join Date: Feb 2019
Location: Live Oak, FL
Posts: 36
Thanks: 7
Thanked 16 Times in 11 Posts
Default

When I cut the shifter out to accept the bushing I moved the pivot point up to get a little longer throw out of it. Then just welded them together. The bolt will go through the shifter bushing and sides of the shifter box.
Attached Thumbnails
fr_666_size880.jpg   fr_669_size880.jpg  

  #42  
Old 03-08-2019, 09:17 PM
Joe-405's Avatar
Joe-405 Joe-405 is online now
2018 Buildoff Winner ! 😎😎
 
Join Date: Mar 2014
Location: Oklahoma
Posts: 2,353
Thanks: 634
Thanked 933 Times in 702 Posts
Default

I have found that the exact same throw on both ends works better with direct linkages. I built a gs500e Suzuki powered golf cart also.
  #43  
Old 03-09-2019, 07:28 AM
Mavaholic Mavaholic is offline
Member
 
Join Date: Feb 2019
Location: Live Oak, FL
Posts: 36
Thanks: 7
Thanked 16 Times in 11 Posts
Default

It could be the cable I'm using is not stout enough but its what I had. I ordered a threaded heim connector which will I will add to one end to give me some adjustability, which I don't have now. If I still have issues after all this I will ditch the cable and rig up some steel rod.
  #44  
Old 03-09-2019, 02:55 PM
Joe-405's Avatar
Joe-405 Joe-405 is online now
2018 Buildoff Winner ! 😎😎
 
Join Date: Mar 2014
Location: Oklahoma
Posts: 2,353
Thanks: 634
Thanked 933 Times in 702 Posts
Default

It needs to be the Morse style cables. I don’t know what you have.

They are also used on aftermarket shifters.
The Following 2 Users Say Thank You to Joe-405 For This Useful Post:
Mavaholic (03-09-2019), Squenz (03-09-2019)
Closed Thread

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -6. The time now is 12:23 AM.