Go Back   DIY Go Kart Forum > Building Plans And Advice > Engines & Clutches


Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 09-28-2019, 09:28 PM
Diy motorsport Diy motorsport is offline
Join Date: Aug 2019
Location: Utah
Posts: 32
Thanks: 5
Thanked 8 Times in 6 Posts
Default New predator motor wonít run right!!

Hey guys so Iím putting a predator motor in my daughters quad and it wonít run right at all, first off I removed the original exhaust and put on a straight pipe, I took off the fuel tank and I cut the air filter housing all up to fit! I have a filter in it but it runs the same with or with out the filter, so my issues are I can get it to run with the choke on at a 1/4 throttle and above and if I block off the intake completely it runs a lot better but it wonít run with the choke off unless itís wot! Any suggestions? I canít trade it for a new one due to what Iíve done to get it to fit, do you think a stage 1 carb kit would fix it or do I have other issues?
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -6. The time now is 11:38 AM.