Go Back   DIY Go Kart Forum > Building Plans And Advice > All Other Parts

Notices

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 05-05-2018, 06:21 PM
CampJeff CampJeff is offline
Junior Member
 
Join Date: May 2018
Location: Wilseyville, CA
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Default Novice question -

Hope thus is in the right place; apologies in advance if not-
Trying to soften the ride on my wifeís powerchair- and Iíve got wheels and tires, now need to connect to 25mm diameter motor shafts - photo is what iím trying for .
On a rear hub, ( for example, 25mm X 115mm ) does the split-clamp portion fit the 25mm axle diameter? If so, and i can track down some fairly long ones - 4Ē or so, should work.
Thanks ahead of time - sounds like alot of knowledgeable folks here!
Attached Images
File Type: jpeg 33A21CD9-2243-4D1C-A39F-029EFC165456.jpeg (211.1 KB, 7 views)
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -6. The time now is 06:17 PM.