View Single Post
  #20  
Old 07-04-2017, 04:06 PM
karl karl is offline
Senior Member
 
Join Date: Feb 2011
Location: North east Ohio
Posts: 1,492
Thanks: 112
Thanked 319 Times in 258 Posts
Default

I finally got the second off the production line. I think the bigger tires make it. And yes it is very yellow.

I dont know what motor to put in it. A tav2 is essential. I got,

h50 tecumseh
5hp briggs
A built 5hp , that would need re-painted
3hp briggs
A lame predator motor

Anyway I thought the fork tube was a good idea. I welded a piece 1in OD 3/4in ID tubing to the frame, Then got 5/8 x 3/4 flanged bronze bushings, ran a 5/8 bolt through that was too long, cut it short and ran a cotter pin to hold it in. That way the 5/8 diameter is the whole way , so the forks turn easy with no slop, and cotter pins dont rattle loose.

Anyway fun stuff.
Attached Thumbnails
unnamed (1).jpg   unnamed (2).jpg  

unnamed.jpg  
The Following User Says Thank You to karl For This Useful Post:
bob58o (07-10-2017)