View Single Post
  #6  
Old 01-25-2020, 11:50 PM
MamaTried MamaTried is offline
Junior Member
 
Join Date: Jan 2020
Location: Napa, CA
Posts: 7
Thanks: 8
Thanked 4 Times in 2 Posts
Default

Thanks all! I have a tendency to overthink stuff! Bushings sounded like a good idea but will get to work on this.

The frame plate spacing doesn't leave much room for the TC rear housing. I had an OMB plate from a prior motovox build and thought the added height would also help as TC sits pretty low. As long as it clears the sprocket no issues with such a short chain? Great advice on moving the axle sprocket to line up with the engine.

I'm guessing the 35 chain and sprocket set-up should be OK? I'll get a better chain and maybe sprocket guards would also help things. Thanks for the advice on the kill switch. I have one from a CRF50 that I think will work.

Any thoughts on the frame make or age? Welds seem pretty strong with consistent beads so looks possibly manufactured.

Thanks again!
Reply With Quote