Thread: 2016 - Arachnid
View Single Post
Old 04-22-2015, 11:32 AM
alexV alexV is offline
Join Date: Dec 2014
Location: Romania
Posts: 89
Thanks: 20
Thanked 3 Times in 3 Posts

I learned to weld from youtube (mostly ChuckE9000 channel). To hold the steel in place while tack welding, I clamped the tubes in position with clamps and pieces of angle iron screwed to the plywood that's used as a building surface. Tack weld the corners, then weld all the outer edges first, all the inner edges second, top and bottom joints in the end.

The result is surprinsingly good.