View Single Post
  #6  
Old 03-20-2011, 09:50 AM
anderkart's Avatar
anderkart anderkart is offline
Moderator
 
Join Date: Apr 2009
Location: Surprise Arizona USA
Posts: 6,030
Thanks: 463
Thanked 1,121 Times in 929 Posts
Default

Tach INP. goes to engines kill switch wire. (or possibly negative post of external type coil if equipped )

+ goes to positive side of 12-volt battery through any type of on/off switch.

- goes to battery ground.

Your brown wire appears to be attached to a light bulb socket for night time illumination. (that socket should easily pry out to change the bulb) So you could connect it to your light switch if you have one, or just hook it up to your on/off switch if you ride at night. Or you dont have to hook it up at all.