View Single Post
Old 05-21-2011, 05:47 PM
Rustydog2010's Avatar
Rustydog2010 Rustydog2010 is offline
NZ Nutta :|
Join Date: Jan 2010
Location: New Zealand
Posts: 945
Thanks: 13
Thanked 43 Times in 38 Posts

Yip, you need to bleed the master cylinder first. Do as Devino said, just attach the the pipe but don't do it up tight, fill the reservoir with brake fluid and pump away, you should see the air bubbling out. Wait until you have no air coming out, then do the pipe up tight. Then bleed the wheel cylinders or caliper.

I weld naked, for an all over tan!