View Single Post
Old 08-20-2019, 08:55 PM
Teerone Teerone is offline
Junior Member
Join Date: Nov 2016
Location: Texas
Posts: 24
Thanks: 36
Thanked 5 Times in 4 Posts
Default Baja Doodlebug rebuild

Just wanted to share some photos of a fun little project. I bought this bike for $200. The bike was originally red and had a terrible "rattle can" paint job. There were several other issues that needed to be addressed. I used nailpolish remover & a small wire brush to remove the black spray paint from the sprocket, brake rotor, and most of the hardware. I chose a dark gray gloss for the new paint. Stripped it down, replaced a ton of parts, and what you see is the final result.
Attached Thumbnails
IMG_20190720_183050146.jpg   IMG_20190720_183131431.jpg  

IMG_20190720_183207974.jpg   IMG_20190720_183026392.jpg  

IMG_20190813_175535951.jpg   IMG_20190813_192259075.jpg  

IMG_20190817_164213003.jpg   IMG_20190831_110704036_HDR.jpg  

IMG_20190831_110725154_HDR.jpg   IMG_20190831_110714450.jpg  

The Following User Says Thank You to Teerone For This Useful Post:
Mrmonk7663 (08-21-2019)