Go Back   DIY Go Kart Forum > Search Forums

Notices

Showing results 1 to 25 of 500
Search took 0.08 seconds.
Search: Posts Made By: KartFab
Forum: Engines & Clutches Yesterday, 09:47 AM
Replies: 20
Views: 352
Posted By KartFab
16 stock carb flows 41-42 Slide carbs: 22...

16 stock carb flows 41-42

Slide carbs:
22 flows 88 CFM,
24 flows 97
26 flows 110

So prbably less than 88, but more than 42 hehe
Forum: Using Tools and Welding 01-23-2020, 11:31 AM
Replies: 9
Views: 155
Posted By KartFab
METROPLEX WELDING SUPPLY is where i get all my...

METROPLEX WELDING SUPPLY is where i get all my stuff. I bought a used tank (expired with the hydrotest with the wrong valve on it) on craigstlist and they hydrotested it and put a new valve on it....
Forum: Engines & Clutches 01-22-2020, 06:41 AM
Replies: 8
Views: 152
Posted By KartFab
hemis had always had flat tops? At least all the...

hemis had always had flat tops? At least all the hemi's I have messed with. Also, i would contact customers service about the cam that has that rough line through the lobe, edges dont matter. A lot...
Forum: Engines & Clutches 01-15-2020, 08:01 PM
Replies: 2
Views: 89
Posted By KartFab
here ya go ...

here ya go
https://www.gokartsupply.com/tcbelts.htm
...
Forum: Engines & Clutches 01-13-2020, 03:27 PM
Replies: 20
Views: 352
Posted By KartFab
the $18 one that you posted is the exact one i...

the $18 one that you posted is the exact one i used for my tecumseh. Only had to drill the main out to .033"

The $10 one that you posted is the exact one i used on my briggs flathead. I did not...
Forum: Engines & Clutches 01-12-2020, 08:10 AM
Replies: 23
Views: 391
Posted By KartFab
depends on how fast you want it. Keep it stock...

depends on how fast you want it. Keep it stock and do a stage 1. If you remove governor, you should do flywheel rod, springs, and throw a decent cam in there for good fun.
Forum: Engines & Clutches 01-08-2020, 05:24 PM
Replies: 20
Views: 352
Posted By KartFab
I got a China carb and had to drill the main to...

I got a China carb and had to drill the main to .033” to work on a tecumseh. Start with idle, then needle position, then main jet. FYI you will need to find or make some sort of intake adaptor.

Ps...
Forum: Engines & Clutches 01-07-2020, 09:24 PM
Replies: 18
Views: 742
Posted By KartFab
Karl, are you saying the 20 series will handle...

Karl, are you saying the 20 series will handle very high rpms? I’ve only messed with two of the
Before, and that was when I was flipping go karts.

Regardless, I’m not going to convince you one...
Forum: Engines & Clutches 01-07-2020, 04:49 PM
Replies: 18
Views: 742
Posted By KartFab
I have always been a fan of the 20 series. The 30...

I have always been a fan of the 20 series. The 30 and 20 series can only handle 8 hp. Anything above that and you’re basically left with a polar pro jr dragster $500+ torque converter, or regear and...
Forum: Photo Gallery & Project Log 01-04-2020, 03:39 PM
Replies: 5
Views: 180
Posted By KartFab
this is what i did to mine to get it to work with...

this is what i did to mine to get it to work with the predator. Notice where the chain is. I had the tecumseh and was really really dissapointed in how poorly it performed. The predator 212 was night...
Forum: Go Kart Discussion 12-31-2019, 09:08 PM
Replies: 0
Views: 103
Posted By KartFab
Last chance

Last chance to win this mini bike by midnight tonight!!! https://teenlife.rallyup.com/minibike
Forum: Go Kart Discussion 12-28-2019, 03:01 PM
Replies: 1
Views: 84
Posted By KartFab
See if you can get a guy to weld it.

See if you can get a guy to weld it.
Forum: Go Kart Discussion 12-20-2019, 05:58 PM
Replies: 10
Views: 228
Posted By KartFab
Judging by the rust on all those parts, i would...

Judging by the rust on all those parts, i would say that's a hard no. The carb could be a knock off, and i got a new one on eBay for $13, that included the air filter. It has an adapter though, so...
Forum: Mini Bikes, Trikes, and Choppers 12-19-2019, 02:30 PM
Replies: 12
Views: 275
Posted By KartFab
MDB is always calling people out. That would be...

MDB is always calling people out. That would be cool to see someone eat humble pie haha.
Forum: Go Kart Discussion 12-16-2019, 01:14 PM
Replies: 24
Views: 552
Posted By KartFab
nice!!! cant wait to see it in the daylight....

nice!!! cant wait to see it in the daylight. Sounds mean.
Forum: Go Kart Discussion 12-15-2019, 10:17 PM
Replies: 6
Views: 155
Posted By KartFab
most manco karts that i have seen just use nuts...

most manco karts that i have seen just use nuts on the bolt between teh sprocket and the rim. Holds it securely. Works great.
Forum: Mini Bikes, Trikes, and Choppers 12-10-2019, 12:34 PM
Replies: 8
Views: 267
Posted By KartFab
Nice, I like it

Nice, I like it
Forum: Go Kart Discussion 12-09-2019, 12:04 PM
Replies: 6
Views: 186
Posted By KartFab
This is my go to website for flathead stuff, the...

This is my go to website for flathead stuff, the way to order is a bit archaic, but they are good people over there.

https://www.out2win.com/catalog/raptorparts.html
Forum: Engines & Clutches 12-09-2019, 12:02 PM
Replies: 18
Views: 742
Posted By KartFab
So i was at gopowersports on saturday and got the...

So i was at gopowersports on saturday and got the chance to see one of their prototype 30 series drive units. Its pretty cool. Long story short, its like a mini 780 series that uses the 30 series...
Forum: Engines & Clutches 12-07-2019, 08:06 AM
Replies: 18
Views: 742
Posted By KartFab
There is a big difference in quality between...

There is a big difference in quality between knock offs. I can tell you that the $120 ones do have higher quality. The $60 have weaker springs, wear tabs, and can break easier when you exceed the ...
Forum: Go Kart Discussion 12-04-2019, 03:04 PM
Replies: 0
Views: 113
Posted By KartFab
Mini Bike Give Away

Hello everyone, this is Grant. I have a little youtube channel and for those that follow the facebook page, muscle mini bike builds, you will recognize this beautiful mini bike as one of the top...
Forum: Go Kart Discussion 12-03-2019, 11:55 PM
Replies: 18
Views: 554
Posted By KartFab
A 22mm mikuni isn’t a restriction if you know...

A 22mm mikuni isn’t a restriction if you know anything about how much flow these Honda /clone heads actually have.
Forum: Engines & Clutches 12-03-2019, 09:02 PM
Replies: 13
Views: 349
Posted By KartFab
My guess is a blown head gasket.

My guess is a blown head gasket.
Forum: Engines & Clutches 12-02-2019, 10:46 PM
Replies: 13
Views: 349
Posted By KartFab
sudden loss of power after cylinder head...

sudden loss of power after cylinder head reassembly? What did you torque your head bolts to? Did you re-use the head-gasket?

Basically anything you touched may have been messed up. Start with what...
Forum: All Other Parts 12-02-2019, 08:21 AM
Replies: 19
Views: 370
Posted By KartFab
From my personal experience, any sort of china...

From my personal experience, any sort of china brand tire is going to wear out extremely fast. Even if it is a million ply. Ive had 2 ply Kenda tires on my mini bike going off road and high use for...
Showing results 1 to 25 of 500

 

All times are GMT -6. The time now is 06:00 PM.