DIY Go Kart Forum

DIY Go Kart Forum (http://www.diygokarts.com/vb/index.php)
-   All Other Parts (http://www.diygokarts.com/vb/forumdisplay.php?f=8)
-   -   Id TC how to replace belt (http://www.diygokarts.com/vb/showthread.php?t=39035)

SCcrashinv 04-17-2018 08:54 AM

Id TC how to replace belt
 
Ok Iím new. I just picked this cart up a few days ago. Previous owner put the wrong belt on. Iím rebuilding the axle also. My question is how do I get the driver off the engine shaft? I thought it would just slide off. I didnít want to apply pressure on it until I found out from someone that knows.

SCcrashinv 04-17-2018 09:09 AM

Forgot to send photo
 
1 Attachment(s)
Sorry. Didnít include photo

bob58o 04-17-2018 09:13 AM

It should just slide off. The only thing holding it on the crank is the single bolt on the end of the crankshaft (and rust and abuse). Penetrating oil, light taps with mallet, maybe some gentle heating if it is very stuck....

SCcrashinv 04-17-2018 11:48 AM

A little PBBlaster and light taps with a brass hammer did the trick.

itsid 04-17-2018 12:46 PM

just to be certain...
you still have the driver's bell that's missing in the pics, right?

without it the weights don't have anything to push against and the TC will not work

'sid

SCcrashinv 04-23-2018 07:34 AM

Quote:

Originally Posted by itsid (Post 498669)
just to be certain...
you still have the driver's bell that's missing in the pics, right?

without it the weights don't have anything to push against and the TC will not work

'sid

Yeah. I have the bell. Just didnít include in the photo.


All times are GMT -6. The time now is 06:21 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.