DIY Go Kart Forum

DIY Go Kart Forum (http://www.diygokarts.com/vb/index.php)
-   Go Kart Discussion (http://www.diygokarts.com/vb/forumdisplay.php?f=6)
-   -   Harbor Freight tires... (http://www.diygokarts.com/vb/showthread.php?t=37764)

The Repairist 09-28-2017 09:56 PM

Harbor Freight tires...
 
I will most definitely sound like a huge idiot for this, but are harbor freight tires a okay substitute for others?

MTNSleder 09-28-2017 10:29 PM

No not good tires at all... I'll bet you $100 they won't last an hour ;)

In other words money is best spent elsewhere...

Ebrownie 09-28-2017 10:46 PM

Harbor freight tires are for wheelbarrows, not go karts. Paper thin rims and tires that won't last 15 minutes on a kart. It is not a good idea at all.

MTNSleder 09-28-2017 11:37 PM

Quote:

Originally Posted by Ebrownie (Post 482037)
....won't last 15 minutes...

Your really setting it low now :D

landuse 09-29-2017 02:06 AM

NO!!! Just NO.

pRoFiT 09-29-2017 02:34 AM

1 Attachment(s)
Mine lasted 15 minutes before it was scary to use them.

Just look at my thread. see this post
http://www.diygokarts.com/vb/showpos...&postcount=131

and this is another 15-20 minutes on my second set. i purchased 4 so might as well have fun for 30 minutes.

p.s. great for adjusting camber and seeing how it will effect good tires. See this image i fixed my camber.

anickode 09-29-2017 06:10 AM

Now some GOOD quality hand truck wheels with sawtooth tires that are made of RUBBER instead of foam vinyl garbage would be ok for a while... They will also have one piece wheels instead of split rims, and better bearings and grease zerks. You will still destroy the low speed bearings in short order, and they usually cost $25 apiece. Might as well buy go kart wheels at that point.

anickode 09-29-2017 10:08 AM

Also depends on the kart and where you ride. If it's a 15mph yard kart that runs on grass, they might do ok. If it's a 40mph kart that runs on tarmac and does a lot of hard cornering, they will scrub bald and the hubs will snap off in no time.

Dustin2017 09-29-2017 10:17 AM

my kids have hf wheels on there drift trikes and they burn up the bearings quickly.

bigrigbri 09-29-2017 10:44 AM

EBay has always been a friend when buying tyres (tires) for my go karts and even the car in the past.
Go for ride on mower stuff it's generally better made and are made from rubber instead of play doe.

MTNSleder 09-29-2017 11:17 AM

If you want good tires go to a tires shop and order up something with a Good brand name like ,
Goodyear, and something with a thicker ply to... They cost a lot but in the long run there worth it...

leesiel 09-29-2017 12:30 PM

:
Quote:

Originally Posted by anickode (Post 482076)
Also depends on the kart and where you ride. If it's a 15mph yard kart that runs on grass, they might do ok. If it's a 40mph kart that runs on tarmac and does a lot of hard cornering, they will scrub bald and the hubs will snap off in no time.

:iagree:
I have used HF tires and snapped all but one ....in the beginning (when I knew nothing) i bought a pair for front of my yardkart and promptly broke or bent them. I have one on the front now with no issues after 20 +hrs of ride time mostly because i have a real go kart tire on the other side and i believe that it toats most of the torsional load.
Having said that I would not recommend those tires to someone else

KingCobra 09-29-2017 03:46 PM

Quote:

Originally Posted by anickode (Post 482076)
Also depends on the kart and where you ride. If it's a 15mph yard kart that runs on grass, they might do ok. If it's a 40mph kart that runs on tarmac and does a lot of hard cornering, they will scrub bald and the hubs will snap off in no time.

I agree!! Most folks just run the streets and most times in circles which will chew up any 'off road' tire in no time. Remember, most tires at HF are off road tires and probably tested as such. You want a good tire for the road, get a DOT tire then.

anickode 09-29-2017 04:09 PM

Quote:

Originally Posted by KingCobra (Post 482109)
I agree!! Most folks just run the streets and most times in circles which will chew up any 'off road' tire in no time. Remember, most tires at HF are off road tires and probably tested as such. You want a good tire for the road, get a DOT tire then.

No, when harbor freight tires say off road, it means off road compared to a hard solid rubber hand truck tire. Because that's what is is. A hand truck tire. So it's compared against smooth floor hand truck tires. It has absolutely nothing to do with grip, treadwear, or DOT compliance.

Yes, a set of good Carlisle knobbies will wear out in a month if you run it for hours every day on asphalt. Harbor Freight hand truck tires will wear out in one hour or less under the same conditions.

That and the manufacturing standards are poor on hand truck tires. They rarely run true, they wobble, eccentric rotation, out of balance, bearing burning junk that isn't designed to take any sort of impact. They are meant to go 4mph.

KingCobra 09-29-2017 04:29 PM

1 Attachment(s)
Quote:

Originally Posted by The Repairist (Post 482034)
I will most definitely sound like a huge idiot for this, but are harbor freight tires a okay substitute for others?

OK, I just returned from the HF website. All tires are listed for hand trucks, dollies, wheel barrows, and lawn mowers. All of those items do travel 5 mph or less so I would say NO. IF they have a tire listed under GO KART, then it must be a better quality tire, but they don't. DON'T use a tire for which it wasn't intended and then call it junk. On a hand truck or lawn mower, it might last 3 or so years. I suggest searching your local areas for off road atv tires that were intended to be beaten upon buy something that travels 20 mph or so. Hope that helps.... I sure feel better now..... BTW, my favorite all around tire is pictured below. I will keep looking for this tire that I hear is discontinued.............

Hellion 09-29-2017 07:37 PM

Quote:

Originally Posted by The Repairist (Post 482034)
I will most definitely sound like a huge idiot for this, but are harbor freight tires a okay substitute for others?

They are a indeed a perfect substitute for others.

You are asking this question on a go kart forum and everyone here assumed you were talking about go kart use. :o:rolleyes:

But the wheels HF sells are perfect substitutes for the intended application. Need a new wheelbarrow wheel? HF has you covered. Need some dolly wheels? HF has you covered, et cetera, et cetera....

KartFab 09-29-2017 08:06 PM

Hey guys I think you are all being a little harsh, give this guy a break. 15 minutes? really? Come on, the most I heard them lasting was 2 hours, which is like 8 times longer than what you said. JEEEEEZE.

chancer 09-29-2017 09:24 PM

Those tires are not even good to replace dolly tires. They are just terrible.
Best use for them is a shop ashtray.

pRoFiT 09-29-2017 11:20 PM

Quote:

Originally Posted by KartFab (Post 482132)
Hey guys I think you are all being a little harsh, give this guy a break. 15 minutes? really? Come on, the most I heard them lasting was 2 hours, which is like 8 times longer than what you said. JEEEEEZE.

I dare you to put those on and Drive full speed for 2 hours! Wont last more then 15 on the road. Maybe in dirt. But then you have to worry about them snapping on the first hole in the ground.

KingCobra 09-30-2017 08:41 PM

OK, that does it, I quit...............snapping tires? Gadzooks!!!

pRoFiT 10-01-2017 01:54 AM

Quote:

Originally Posted by KingCobra (Post 482211)
OK, that does it, I quit...............snapping tires? Gadzooks!!!

Yah the center hub that holds the bearings is pressed in place not welded. So any real amount of side force like turning, could snap it off.

I welded mine together, purchased good bearings...and after 15minutes of fun I replaced the tires with Walmart tractor tires. $15 each. No problems with them so far. But Iíve only put a couple good hours on them. Need to find a good place to ride.

Stupid kalifornia gokart laws...

Anyways, be safe out there.

KingCobra 10-01-2017 06:25 AM

1 Attachment(s)
Hahahaha, I know, I was juss messin' with ya.......

OzFab 10-02-2017 12:43 AM

Quote:

Originally Posted by anickode (Post 482076)
Also depends on the kart and where you ride. If it's a 15mph yard kart that runs on grass, they might do ok. If it's a 40mph kart that runs on tarmac and does a lot of hard cornering, they will scrub bald and the hubs will snap off in no time.

:iagree:

My daughters kart had those on the front & I'm using them on the twin karts which will only do around 15mph around the yard; any faster than that & I'd be spending a lot more...

Dustin2017 10-02-2017 12:46 AM

I think we all got the point and there not worth buying.maybe I'm the only one that gets it.

Hellion 10-02-2017 02:20 AM

No, the point will never be made. If you do a forum search, the same topic comes up a sextillion times.

They are not go kart tires/wheels and there's not a product description anywhere saying they are. It could conceivably be a confusion with Northern Tool & Equipment which is HF's closest competitor whom actually sells bona fide go kart wheels...

Maybe this was a thread designed to troll the forum? :popcorn:

https://media.giphy.com/media/hrnYspWWhsIyA/source.gif

Jedibrad 10-03-2017 07:49 PM

Wonder if these would be any good? Looking for some "4 knobbys
https://www.ebay.com/i/272607898096?...D1326216687795

---------- Post added at 08:49 PM ---------- Previous post was at 08:44 PM ----------

Or these...?
http://www.ebay.com/itm/252723290443...MakeTrack=true

Hellion 10-03-2017 07:52 PM

Quote:

Originally Posted by Jedibrad (Post 482591)
Wonder if these would be any good? Looking for some "4 knobbys
https://www.ebay.com/i/272607898096?...D1326216687795

---------- Post added at 08:49 PM ---------- Previous post was at 08:44 PM ----------

Or these...?
http://www.ebay.com/itm/252723290443...MakeTrack=true

Nice hijack.

Those are not HF tires. If they were, I'd say SURE, GO AHEAD :D

I'd make your own thread, because this one is for the obvious purposes of satire.

Dustin2017 10-03-2017 08:01 PM

All I can say is they say for go kart

Hellion 10-03-2017 08:23 PM

Quote:

Originally Posted by Dustin2017 (Post 482599)
All I can say is they say for go kart

You clever man, you. Nothing gets by you. :smartass:

I'ma keep an eye on you.


All times are GMT -6. The time now is 11:19 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.