DIY Go Kart Forum

DIY Go Kart Forum (
-   Photo Gallery & Project Log (
-   -   My poor manco dingo project (

Dingocat 08-15-2019 02:50 PM

I looked at it closer. Yes that's what it looks like. Wheels/hubs stuck on axle? And what if you flip the axle around and leave the pillow blocks and use 1 inch tube and weld the axle together with it.

Smerft85 08-15-2019 06:43 PM

Haven't taken it apart yet, but it is starting to look like I'll need to replace the entire axle! Pretty sure I spotted junk welds on at least the sprocket, but I'll try to save the sprocket, it's a 64 tooth.

Smerft85 09-04-2019 11:38 AM

Well, the big dingo is being put on hold for a while along with the smaller one, im going to fix up the little 400 and give it to my niece and nephews, after that I'll see where my parts pile is sitting. I couldn't get the CVT to mount straight on the gx270, so I'll probably put a 212 clone on the dingo so the CVT can be mounted, I think it's a 30 series and shouldn't be on a 9hp engine anyway.

Smerft85 09-15-2019 08:31 AM

1 Attachment(s)
Attachment 111906

Look what just showed up in my driveway! Anyone wanna talk me out of doing a 580 kitty swap into a dingo??

Budget GoKart 09-15-2019 11:14 AM

Do it.

Smerft85 09-15-2019 01:04 PM


Originally Posted by Budget GoKart (Post 532768)
Do it.

That's not much in the way of talking me out of it lol!

JTSpeedDemon 09-15-2019 01:20 PM

Make a "Death Dingo"!

Smerft85 09-15-2019 03:07 PM


Originally Posted by JTSpeedDemon (Post 532775)
Make a "Death Dingo"!

Something like that! Half of me is afraid, the other half says usr the suspension and do a full suspension upgrade while im at it, and keep as much of the dingo intact as I can.

All times are GMT -6. The time now is 01:45 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.