PDA

View Full Version : Huge gx200 clone part out, cheap prices

justinkk2005
11-03-2009, 08:09 PM
Hey guys, I was riding my kart the other day when I got a little too throttle happy and I broke the stock rod (pretty common in these engines I hear) I ordered a new clone engine and ordered a new billet rod, flat top piston, mikuni carb 22 mm, and a variety of jets ;)

So I ended up tearing down the gx200 and it was full of great parts, this engine only had about 10 gas tanks ran through it. Parts & prices (I have pictures of all the parts except the stock carb, they just take so long to upload that I will post them up when requested)

Brand new carb (used through 2 tanks of gas) $10 + shipping

Stock gx200 head complete with valves, rocker arms, springs, retainers, valve cover with gasket, and stock push rods It has a little bit of jb weld on the studs where the exhaust goes because i had an exhaust leak but that can be chipped off by hand- $20 + shipping

stock bore piston with rings in excellent shape - $10 + shipping

stock flywheel - $15 plus shipping

stock fuel tank - $10 plus shipping

Side cover of engine - $10 plus shipping

stock coil - $15 plus shipping

main bearings still in good shape, $10 shipped

crank that needs turning a little or polished $10 plus ship

stock cam - $10 shipped

a spare carb that needs rebuilt $5 plus shipping

red side cover without the pull start $10 plus shipping



I'll sell everything at once for $50 plus shipping

I'm a legit seller, check my ebay: justinkk2005 check d-series.org (have a build civic too) username on there is: justin_97ex and check my itrader. I've sold on minibikeforum too

email is the fastest way to contact me, justinkk2005@gmail.com
neebles
11-03-2009, 08:28 PM
Can you post a picture of the red side cover, I may be interested...
justinkk2005
11-03-2009, 08:34 PM
The uploads currently on photobucket are 6 out of 9 and it's taken it an hour to get that far, my upload speed SUCKS but here is a video of the kart when it ran, you should be able to get a view of it from there.

http://www.youtube.com/watch?v=15G5FEd2Bi0
justinkk2005
11-03-2009, 09:01 PM
Head:
http://i64.photobucket.com/albums/h173/justinkk2005/SANY0050.jpg

Head 2:
http://i64.photobucket.com/albums/h173/justinkk2005/SANY0049-1.jpg

Cam:
http://i64.photobucket.com/albums/h173/justinkk2005/SANY0051.jpg

Flywheel:
http://i64.photobucket.com/albums/h173/justinkk2005/SANY0052.jpg

Coil:
http://i64.photobucket.com/albums/h173/justinkk2005/SANY0053.jpg

Side cover:
http://i64.photobucket.com/albums/h173/justinkk2005/SANY0054.jpg

Fan cover:
http://i64.photobucket.com/albums/h173/justinkk2005/SANY0058.jpg

Push rods that go with head:
http://i64.photobucket.com/albums/h173/justinkk2005/SANY0055.jpg

Piston:
http://i64.photobucket.com/albums/h173/justinkk2005/SANY0057.jpg

Piston 2, note the broken rod, you can have that too lol:
http://i64.photobucket.com/albums/h173/justinkk2005/SANY0056.jpg
1992suburban
11-03-2009, 09:12 PM
how many RPMS were you turning it???

did the cap seperate or the rod break??

also what was the top speed that thing WAS moving out
1992suburban
11-03-2009, 09:15 PM
the carb in the video for 10 bux??

or a stock carb??
justinkk2005
11-03-2009, 09:17 PM
how many RPMS were you turning it???

did the cap seperate or the rod break??

also what was the top speed that thing WAS moving out

i'm not sure on the RPM man, it still had more left in it though it was just leaning out and the valve springs were floating. That was a stock motor with no governor and a 105 main jet. Hopefully my future plans (may have a video up by next week) will be even more powerful xD

The whole rod was completely obliterated, I mean there was maybe 3 tiny pieces of it left that I could find honestly. I did find the bolts and they were bent almost double. It was a hard lick. I did'nt find the bearings (if it had any), no rod cap or anything.
justinkk2005
11-03-2009, 09:18 PM
the carb in the video for 10 bux??

or a stock carb??

stock one, I cant let that Mikuni go ;)
1992suburban
11-03-2009, 09:25 PM
stock one, I cant let that Mikuni go ;)

haha thought so


so you had stock springs on it too?

so it was prolly 57-5800
justinkk2005
11-03-2009, 09:28 PM
haha thought so


so you had stock springs on it too?

so it was prolly 57-5800


Yea, i'm debating on whether to use 18 lbs springs on my build. I'm not sure on the benefits from going from 15 lbs to 18 lbs.
1992suburban
11-03-2009, 09:28 PM
the stock ones should have been 8lbers

edit. maybe 10 LOL
justinkk2005
11-03-2009, 09:34 PM
the stock ones should have been 8lbers

edit. maybe 10 LOL

really? see i'm good with these engines but I'm not to sure on the specs. So I guess I would benefit with the 18 lbs springs hahah
1992suburban
11-03-2009, 09:35 PM
well if the rod went with stock springs and good oil changes.. then I would think it was a fluke.. there are tins of these motors with stock rods turning 6-6200

what brand is yours??? i know its RED
justinkk2005
11-04-2009, 06:05 AM
well if the rod went with stock springs and good oil changes.. then I would think it was a fluke.. there are tins of these motors with stock rods turning 6-6200

what brand is yours??? i know its RED

Yamakoyo YK650 LOL

I had walmart supertech synthetic in at 10w30
justinkk2005
11-04-2009, 09:13 AM
bump...

anyone want this stuff before it goes on "the bay" ? lol
justinkk2005
11-08-2009, 05:25 PM
bump..

head, carbs, and cam gone.

I just recently received a new stock rod and new stock piston (without rings) if anyone is interested in those as a combo: $20 plus shipping
justinkk2005
11-25-2009, 08:43 AM
bump
modelengineer
11-25-2009, 03:24 PM
If you've got a roll cage, you need a 4-6 point harness or it's more dangerous than without a cage.