pics of my wheels for my chopper

[athif]

hi everyone.

These are the wheels that im going to use for my mini chopper, i got them from princessauto which are used for those stnad up trollys, the one u see moovers using. I was just wondering if anyone knew how i would attatch the sprocket to these tires without welding it to the rim.

here are the pics of the rimb and tire, its a tube tire.

[2or3wheels]

wheres your sproket?

[robin]

i used longer bolts with spacers that way i culd have the sprocket closer to the wheel so it dint scrape on the florr when i leand in corners

[athif]

i didnt get the sprocket yet, i was just wondering if any of u guys knew how to attatch it, i was wondering where it would go

[2or3wheels]

You bolt it on. I believe with a hub of somekind. Thats how mine works.

[athif]

You bolt it on. I believe with a hub of somekind. Thats how mine works.

:confused: ooo, am i supposed to weld it on the hub or just put some kind of spacer? Im thinking of buying a new wheel, but i know some of you guys know how, so i thought to ask.

if you havea closer pic of your rear wheel set that would be all the help i need
thanks

[2or3wheels]

im one of the last on earth without a digital camera, ill go and look tomorrow and try and draw it up.

[athif]

im one of the last on earth without a digital camera, ill go and look tomorrow and try and draw it up.

lol, if u lived near me, i would give u one for free, i have like 15 digital cameras lying around the house. I would apreciate it alot if u could draw it up, thanks :D

[2or3wheels]

**** send me one in the mail 3432 41st ave s minneapolis minnesota 55406 :) Im leaving for my cabin right now so ill do it sometime monday i hope if not tuesday.

[athif]

**** send me one in the mail 3432 41st ave s minneapolis minnesota 55406 :) Im leaving for my cabin right now so ill do it sometime monday i hope if not tuesday.

lol i can try, but there not the good ones, their there the ones u get for 20 bucks, il have to find a good one lying around the house lol, and see how much it would cost to send one there probably more than the camera itself:D :eek:

[my_mini_bike]

those wheels are pretty cheap, you could use them but expect to be replacing them. i used to have them as the front wheels on my go kart, the bearings would usualy wear out BUT i was using them on a very bumpy track and if i drove it on concrete the tires would wear out rather quickly.
Another problem we had was that the bearing housing would seperate from the wheel itself but we just welded them together and it prolonged the life of the wheels for a bit good luck!

[philip metzner]

you need a double flanged hub for your wheel.

[athif]

you need a double flanged hub for your wheel.

I think ur right, i was thinking of welding the sprocket to the hub, thanks

[athif]

those wheels are pretty cheap, you could use them but expect to be replacing them. i used to have them as the front wheels on my go kart, the bearings would usualy wear out BUT i was using them on a very bumpy track and if i drove it on concrete the tires would wear out rather quickly.
Another problem we had was that the bearing housing would seperate from the wheel itself but we just welded them together and it prolonged the life of the wheels for a bit good luck!

LOL ye i think ur right, the wheels are strong, but the hubs are reallly garbage.:eek: thanks for ur help lol