bicycle mini

[philip metzner]

finaly i got my brakes, fenders,throttle ans stuff on the way. every time i would save up a little something else would happen.
also sence ive been gone i got my gemini scrambler mini moved down here in georgia from delaware. i have been collecting hardware and making parts for about two weeks. the orange bike is what the gemini is supposed to look like. the one in the pic aint mine. the other one is the bicycle mini.-phil

[2or3wheels]

I have a gemini motorcycle frame thats been chopped to fit a 5 horse, its geared to go 40 and that wilth 54 tooth and a 10, cant get any better, and no room for a jackshaft so its buring the clutch. But thay look cool i like the bike one.

[athif]

cool, did u use a a bike handle to make the front?

[philip metzner]

i aint sure what your asking, but the fork, neck, handlebars, and upper frame are bicycle.-phil

[rocko]

did you use a two cycle engine and if you did what size sprockets did you use teeth:confused:

[philip metzner]

Rocko, thats a McCulloch two cycle vintage race kart engine. i dont remember the sprockets exactly. the maxtorque clutch is mounted to the jackshaft, and its a standard#41 chain clutch. the rear sprocket is 48 teeth. the primary sprockets are tailored to my engine because it needs alot of stall rpm's, it idles at about 3000 rpm, i had to slow the clutch down. unless you have the same engine as i do, it wouldnt be right anyway.
as soon as i get to a stoping point on my gemini im going to get back to work on it and finish the brakes and stuff.-phil