home made chopper (2nd one!)

[robin]

all that have seen my old one will no its a total deth trap so ime making a newer one its gona be safe but alot mor heavy thicker steel bigger tire pics to come soon ile keep yah posted

[my_mini_bike]

how then mini chopper going robin ? have you made much progress on it yet

[robin]

going well made the main part of the frame need to make forks and need a back wheel clutch and sprocket wahts the smalest sproket u can get hers a better pic of my old one befor i cut up the frame http://i142.photobucket.com/albums/r93/robin_crash24/P2210097.jpg

oh and eny one no what that contraption on the cam shaft is when it gets pule out it moved a little tab over to the bottom of the exhaust cam lobe ????

http://i142.photobucket.com/albums/r93/robin_crash24/P2220108.jpg

start of the new frame the back wher the wheel will sit http://i142.photobucket.com/albums/r93/robin_crash24/P4010014.jpg

[robin]

rigt i go to upload and my hosting site is down todayive been macking the manafolds for the new carb befor i had a carb of a 125 pit bike when i raged it it used to get so cold the engine would stop whays this ?
shudent have this problem

[robin]

http://i142.photobucket.com/albums/r93/robin_crash24/P4130013.jpg
http://i142.photobucket.com/albums/r93/robin_crash24/P4120009.jpg
http://i142.photobucket.com/albums/r93/robin_crash24/P4130015.jpg
not sure about the drive i dont think it will be fast aenuf with just a chain from the clutch to the whell i might have to put on a jack shaft to geer it up like my jast one last one was i would like about 60 my last one got about 50

[robin]

well copple more pics of my progres

http://i142.photobucket.com/albums/r93/robin_crash24/P4140022.jpg

http://i142.photobucket.com/albums/r93/robin_crash24/P4140023.jpg


http://i142.photobucket.com/albums/r93/robin_crash24/P4140024.jpg


http://i142.photobucket.com/albums/r93/robin_crash24/P4140025.jpg

[mikeandike]

thats one badass chopper!

[2or3wheels]

Look SWWWWWWWWWWWWWWWWWWEEEEEEEEEET

[robin]

tried it today it was well over geard top speed of like 20 smoked the tire nice i just put a tiny sprocket on the engine no clutch and bumped it went fine just slow

[2or3wheels]

Was the back tire that car tire?

[robin]

yeah just the hub i made is out a little bit the clutch its taking a age to come thro the post to do the burn out i got 2 of my m8s to hold the back of the bike of the floor then i started the engine then gave it alod of revs then thay let the tire doen and it dident stall then it started smoken

[2or3wheels]

nothing to say but nice

[robin]

i changed the wheel today and it dont wobble it was the rim of the tire that was bent ime having troble with the botls holding on the sprocket snapping ive replaced them about 3 times now oh and ime going to make a twin exhaust one on each side once its working right and i dont have to alter eny thing

http://i142.photobucket.com/albums/r93/robin_crash24/P1010032.jpg

http://i142.photobucket.com/albums/r93/robin_crash24/P1010033.jpg

http://i142.photobucket.com/albums/r93/robin_crash24/P1010035.jpg

tried it with a faster gear ratio but we culedent get it moving fast enuf to start and when it fired over it snaped the bolts on the sprocket

[2or3wheels]

What bolts are you using? maybe a stronger metal. or more.

[robin]

ive used hardend steel alen bolts thay snaped not mutch else i can use ime just gona fix my tank on while ime wating 4 a clutch ive got to start my engine and grind the shaft down to 3/4 or use a jack shaft tthe shast is 7/8 i culdent find a clutch to fit it

[athif]

HOLY MACARONI! where did u get that engine and how much did it cost to make that chopper?

[robin]

i swaped the engine for a diesle engine of a cement mixer when i got the engine it dident run it had a gas convershion but when the person did it thay mucked up the origanal carb i have the froks are of my old bike i solt it to my m8 and he blew the engine in a week so i baut it back of him at a fraction of the price you can see the bike behind my old chopper ner the top of the page as to date apart from a new clutch i havent spent eny thing apart from buying the bike back ime tring to fix the engine of the bike so i can put the engine in a gocart ime going to sell the chopper a month or so befor ime 16 to hep me pay for a real bike one thats not ileagal

[robin]

waho my clutch came today i put it on and the chain it was fine ime getting about 50~55mph once i got 60 i wonderrd whay then when i let of the throttle my engine stopd i thaut i killed it but the cab came lose

[my_mini_bike]

back on the topic on snapping bolts, cant you use high tensile bolts? the ones with allen key head. they have a tensile strength of 99 tonnes dont they

[robin]

yea h thats what ive replaved them with but thay snaped but its fine now that ive got a clutch vids today i hope

[robin]

http://i142.photobucket.com/albums/r93/robin_crash24/th_P1040046.jpg (http://s142.photobucket.com/albums/r93/robin_crash24/?action=view&current=P1040046.flv)

http://i142.photobucket.com/albums/r93/robin_crash24/th_P1040045.jpg (http://s142.photobucket.com/albums/r93/robin_crash24/?action=view&current=P1040045.flv)

http://i142.photobucket.com/albums/r93/robin_crash24/th_P1040044.jpg (http://s142.photobucket.com/albums/r93/robin_crash24/?action=view&current=P1040044.flv)

http://i142.photobucket.com/albums/r93/robin_crash24/P1040050.jpg

[kibble]

Dude, you already finished it, painted it and everything?

[robin]

its very far from finished i killed my clutch and it damiged my engine shaft i think
i need to mount the tank make a seat get a new back wheel put lights on it lots of things

[robin]

ive been ryding it as it was banged on the clutch of my old mini bike that flew apart on me why do i keep eating clutches my last one had one with no problems the onley difrence is spun about twice the speed of the engine and engaged erleyer and locked up do i need to put the clutch on a jackshaft with is deard up then gear it down with a jack shaft then to the wheel ?

[2or3wheels]

right, thats whats happening with my mini motorcycle, but i have no room for a jackshaft so im going to sell it.

[robin]

ime gona need 4 berings and 4 extra sprockets and 2 jackshafts my last one sounded nicer the engine used to rer more the faster you go not just constantley flat out

[2or3wheels]

What do you mean by fall out?

[robin]

sorry i mean flat out my old one used to change sound the faster you went this one becuse the clutch slipps it just contstantley reved up ive found a vid on my frends fone of my old one its louder but sounds way better and dident have eny drive problems

[2or3wheels]

how does the clutch fall out? U mean stop accelerating.