Hippie Mike
12-15-2008, 12:48 AM
:cheers2: This ol hippie is Dyslexic so please under my spelling a ol dog that can learn new tricks . The wheel chair that used to make my trike is a quickie p 300. dul mortors 24 volts top seed 6to 7 mile a hour that good for the city sidewalks but I still need to control my speed in krould so i dont run people over you got to be safe found tec that knows a bout speed controle they make all kinds of controler after i rewird my trike and removed the wheel chair controler put my own controler that made for my trike out of foot peddel to control a grainder it work ok then got hot an burned up i found you if battires a fulley charged it dont run hot the motor pull amps its gets work out on hill i dont have brakes on the motors i have dul hand brakes on the back wheels lit slow it a kill swich cut power the thing that im tryin to say you got to undert stand the motor that you going to use the wheel chair motor can make a great mode and what doing tryin to help the person or my fellow not waste his time what im sayin get an try it ask do it what ever it take but most al share with rest of tell us what you the i dont knows is how amps a wheel chair motor runs on if it dose run cool if you drill holes in side OE THE motor you put wrong place you could hurt the motor this what i have been think a bout for last day or so so please give input thank you one an all peace the HIPPIE INPUT