View Full Version : GSXR 600 wiring diagram
05-17-2012, 05:18 AM
I'm looking for a wiring diagram for an 07
Iv found a few service manuals but they either won't work or don't have the colours
In particular one that gives good reference to the ingectors
It's got two per cylender so it's a mind mess
05-17-2012, 05:59 AM
I don't know if this is what you are looking for, cos I have no clue about wiring diagrams
05-17-2012, 06:34 AM
Problem is it doesn't help with the ingectors
It shows only one colour and only one set
I also know nothing about wiring
05-17-2012, 08:29 AM
This diagram shows all 4 injectors with wiring colors: http://www.gixxer.com/photopost/showphoto.php?photo=4928&size=big
The 4 injectors are at the very bottom, do those colors match your injector wiring?
05-17-2012, 03:53 PM
That's the problem I'm finding
The ingectors are all different colours
And there is 8 of them
05-17-2012, 06:12 PM
All the wiring diagrams i found online said they were for bikes sold in the USA or Canada. The bikes sold in OZ must have used different colors. Have you already tried posting a thread on the gixxer forum? Maybe someone will have the European wiring diagram.
05-17-2012, 11:31 PM
Ya been on there
My engine is from the US
05-18-2012, 08:54 AM
Injector wiring harness are usually formed so they can only reach/plug into the correct injectors. Did you get the wiring harness from the same bike as the engine? What colors are your 8 injector wires? Got any pics of your wiring?
I searched the gixxer forum and couldn't find your thread, post the link maybe it'll give me some more clues to help you.
05-18-2012, 06:59 PM
ya they have set it out so the wires can only reach one cylender but there is two ingectors per cylender
i also couldnt find my thread on gixxer but it was a long time ago that i forgot my details
so i started a new profile
all the last post yeilded was a service manual
the wire colours i have are
one set of yellow/red and grey with a diferant tracers (the ones on your diagram
then the second set is yellow / red and a aqua coluor with a differant tracer
05-19-2012, 10:47 AM
I found this harness layout pic here: http://www.cheapcycleparts.com/model_years/4170-suzuki-2007--gsx-r600/assemblies/128722
It looks like the section next to the #1 plugs into your lower injectors...
05-19-2012, 06:58 PM
ha u have reveiled some intresting things there
first off i have the harness running the wrong way around the head :worried2::mad2:
i went off the coil positions
and secondly the harness runs low to the case so the shorter ones must be the bottom ones
the ingector wires are the string that #14 plugs into
i hope these guys ship to aus as there are quite a few parts i need
they still aint cheap, $14 for a fuel pump o ring ?
but still 1/2 price of the local shop
05-20-2012, 09:48 AM
Cool, i found a couple pics in this thread that might help too: http://www.gixxer.com/forums/showthread.php?t=248512
vBulletin® v3.8.4, Copyright ©2000-2015, Jelsoft Enterprises Ltd.